If you click on the button with an anchor on it appearing under the search bar,

you will open the port segment overview. This overview will show you three different port segments that you can choose among.

These segments are:

  • Dynamic selection

  • All Bunker Ports

  • Specific Segments


How to Add the "Dynamic Selection" Segment to Your Map

Step 1

Since this selection depends on the vessel segments in the map it is important that you already have some vessels appearing on your map.

In this example, we are turning on the "Tanker" segment.

Step 2

Once you have chosen your vessels, open the port overview by clicking on the port icon. Then, click on "Dynamic selection".

Note that when a port segment is selected, a blue circle with a checkmark appears next to it.

Close the port overview by dragging the pop-up down or clicking on the map behind it.

Note that to remove the dynamic selection segment from the map, you will need to open the port overview and click on it one more time. The blue circle with the checkmark will disappear when the segment is removed.


How to Show the "All Bunker Ports" Segment on Your Map

Open the port overview by clicking on the port icon under the search bar.

Click on "all bunker ports" and close the pop-up.

Note that to remove the bunker port segment from the map, you will need to open the port overview and click on it one more time. The blue circle with the checkmark will disappear when the segment is removed.


How to Add the "Specific Segments" to Your Map

Step 1

Open the port overview by clicking on the port icon under the search bar.

Click on "Specific Segments". you will be brought to a new tab showing all the different port segments you can choose between.

Step 2

Choose the type of port you wish by clicking on the ones you want to be shown on your map or choose them all by clicking on "Show All Segments".

Step 3

Return to the overview by clicking on the arrow in the upper left corner of your new tab. You can now see a number on the right side of the "Specific Segments" segment.

This number shows how many port segments you have chosen.

Step 4

Close the tab by dragging it down or clicking on the map behind it.

Enjoy your ports!

Note that to remove the specific segments from the map, you will need to open the specific segment tab again and click on the different port segments you have selected. If you chose "show all segments" just click on the same button one more time. The blue circle with the checkmark will disappear when the segments are removed.


How to Combine the Different Port Segments on Your Map

Sometimes you may want to combine the different port segments in the overview.

In ShipAtlas, you can combine the "All Bunker Ports" segment with one of the other two. The ones that can not be combined in our map are the "Dynamic Selection" segment and the "Specific Segments" segment.


Next step

Congratulations! 🎉

You now know how to add port segments to your map!

In our next guide, you will learn how to access the port cards in ShipAtlas!

Did this answer your question?