If you click on the button with an anchor it appears under the search bar,

you will open the port segment menu. This menu will show you an overview of the three different port segments you can choose among.

These segments are:

  • Dynamic selection

  • All Bunker Ports

  • Specific Segments


How to Add the "Dynamic Selection" Segment to Your Map

Step 1

Since this selection depends on the vessel segments in the map it is important that you already have some vessels appearing on your map. In this example, we are turning some of the subsegments from the "Tanker" segment.

Step 2

Once you have chosen your vessels, open the port segment menu by clicking on the port icon. Then, click on "Dynamic selection". Close the port menu by clicking on the "X" in the upper left corner of the menu or clicking on the map behind it.

Note that when a port segment is selected, a blue circle with a checkmark appears next to it.

To remove the dynamic selection segment from the map, you will need to open the port segment menu and click on it one more time. The blue button will turn grey when the segment is unselected.


How to Show the "All Bunker Ports" Segment on Your Map

Open the port overview by clicking on the port icon under the search bar.

Click on "all bunker ports" and close the menu.

You can remove the bunker port segment from the map the same way you did with the dynamic port selection.


How to Add the "Specific Segments" to Your Map

Step 1

Open the port overview by clicking on the port icon under the search bar.

Click on "Specific Segments". You will be brought to a new page in the menu showing all the different port segments you can choose between.

Step 2

Choose a port segment by clicking on the ones you want to be shown on your map or choose them all by clicking on "Show All Segments".

Step 3

Return to the main overview by clicking on the arrow in the upper left corner of your new tab. You can now see a number on the right side of the "Specific Segments" segment. This number shows how many port segments you have chosen.

Step 4

Close the menu and start adding vessel segments that fit your port selections to make your map complete!

You can remove the bunker port segment from the map the same way you did with the dynamic port selection.


How to Combine the Different Port Segments on Your Map

Sometimes you may want to combine the different port segments.

In ShipAtlas, you can combine the "All Bunker Ports" segment with one of the other two. The ones that can not be combined in our map are the "Dynamic Selection" segment and the "Specific Segments" segment.


Next step

Congratulations! 🎉

You now know how to add port segments to your map!

In our next guide, you will learn how to access the port cards in ShipAtlas!

Did this answer your question?